Industrial Paper single shaft shredder,plastic waste shredder,plastic recycling shredder,plastic bag shredder machine
Model | 600 | 800 | 1200 | 1600 |
Motor power (KW) |
22 | 55 | 75 | 132 |
Rotary blades Qty | 26 | 45 | 64 | 120 |
Stable blades Qty | 2 | 4 | 4 | 4 |
Rotating length | 600 | 800 | 1200 | 1600 |
Blade material | SKD-11, D2 or Customized |
LIANDA Design
The single-shaft shredder is mainly used to break materials into smaller and uniform pieces. LIANDA single-shaft shredder is equipped with a large inertia blade roller and a hydraulic pusher, which can ensure high output; the moving knife and the fixed knife have high-efficiency and regular cutting actions, and coordinate with the control of the sieve screen,the crushed material can be cut into the expected size.
The single-shaft shredder designed and manufactured by LIANDA MACHINE has a larger knife roller, torque, power and corresponding crushing structure. It can be used to crush large bundles of plastic bottles, cans, barrels, boxes, leftovers, glass steel, Environmentally friendly shredding and recycling of waste rubber, waste paper, old carpets, wooden pallets, domestic garbage, scrap metal, large-caliber iron boxes, etc.
Machine Details
1
|
① Rotary blades ② Blades roller
③ Fixed blades ④ Sieve Screen
The cutting part is composed of a blade roller, rotary blades, fixed blades and sievescreen. |
|
The minimum installation gap between the rotary blades and the fixed blades is 0.1mm
|
||
Integral processing knife roller to ensure the cutting gap between the Rotary blades and the fixed blades
|
||
The blade can be installed detachably for easy maintenance
|
||
The motor drives the blade roller to rotate at a high speed through the reducer, so that the rotary blades mounted on the blade roller and the fixed blade form a cut. After one cut, if the size of the material is smaller than the diameter of the sieve screen, it will be discharged from the mesh, otherwise two or more cuttings on the raw material are carried out in the cutting room, and the material can be discharged until the discharge size is reached. |
|
|
The screen can be disassembled and replaced to change the particle size of the material
|
||
2 |
Forced feeding by pusher to improve production efficiency
|
|
Adopt high-strength screws to fasten, solid structure and durable. | ||
3 | Sealed bearing protection design, which can be waterproof and dustproof, and enlonger the service life of the bearing |
|
4 |
Siemens PLC monitors the motor current in real time, and the knife axis automatically reverses when the load is overloaded to protect the motor;
|
|
5 | Equipped with a cutter shaft cooling system for materials with low melting points to prevent the materials from being burnt due to excessive temperature. | |
6 | The equipment has passed CE certification and complies with EU safety standards |